Cabot Semi-Solid Oil-Based Deck and Siding Stain Neutral Base 1 gal.

Cabot Semi-Solid Oil-Based Deck and Siding Stain Neutral Base 1 gal.

• • Benefits •
• • Description •
• • Specification •

• • Highlight Enhance and protect the natural beauty of wood while adding a touch of color

  • Manufactured for increased durability

  • Oil-Based, Water Repellent

  • Useful for fence, siding, and decks

  • Excellent UV protection with a deep penetrating semi-solid finish

  • Resistant to scuffing and fading

  • LOW VOC

  • One coat Exterior Application

• Richly colored, deeply penetrating, oil-based Cabot® Semi-Solid Stain & Sealer Low VOC offers wood protection and long-lasting beauty. Compared to semi-transparent stains, this particular stain has more concealing power, yet its appealing finish brings out the texture’s inherent attractiveness.

  Semi-Solid Deck Features

  Cabot Semi-Solid Deck & Siding Stains are deep penetrating linseed oil-based stains that provide long lasting beauty and wood protection, highlight the natural beauty of the wood’s texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot deck and siding stains are extremely durable and help protect wood against the sun’s damaging ultraviolet rays.

  Coverage

  Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 1400 series covers approximately 400-500 square feet per gallon, 17400 series covers approximately 250-350 square feet per gallon.

  Where to Use

  Cabot Semi-Solid Deck & Siding Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces. Cabot Semi-Solid Deck & Siding Stains can be used on most types of smooth and rough exterior wood, including decks, siding, fences, log homes and roofs. They provide excellent results on weathered wood and well-seasoned lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding.

  Preparing Your Surfaces

  Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or wood must be exposed to dry weather a minimum of 3 to 5 days.) Previously semi-transparent stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residue and other foreign matter. Use Cabot Problem-Solver Strippers (8004) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove nail and metal rust stains, and renew the wood’s appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than three months.

  Application

  Stir thoroughly before and occasionally while using. If the job requires more than one batch, blend them together. Apply evenly with a brush to small sections. For best results, use a high quality pad applicator or stain brush. To avoid lap marks, start at one edge and follow through to the end of the boards. Restain depending on sun exposure and wear every 2-4 years (up to 1 year for Clear).

  Cleanup and Disposal

  1400 series: Clean brushes and equipment with mineral spirits

  17400 series: Before drying, clean brushes and equipment with soap and water. Use mineral spirits after drying.

  Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Danger: Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations.

• Brand Name: Cabot

  Sub Brand: Low VOC

  Transparency: Semi-Solid

  Tintable: Yes

  Color: Neutral Base

  Base Type: Oil-Based

  Product Type: Deck and Siding Stain

  Container Size: 1 gal

  UV Resistant: Yes

  Application Method: Brush/Pad/Spray

  Water Repellent: Yes

  VOC Level: 250 g/L

  Sealer: Yes

  Coverage Area: 250-350 sq ft

  Recommended Surface: Deck/Siding/Fence

  Full Cure Time: 48 hr

  Color Family: Tintable Base

  Clean up: Soap and Water

  Technical Data Sheet